Roosebeck Pixie Harp 19-String Non-Standing Chelby Levers Walnut Thistle

Roosebeck Pixie Harp 19-String Non-Standing Chelby Levers Walnut Thistle

Featuring the smooth, sleek look of the Chelby levers is reflected in their functionality. Compared to the standard Roosebeck harp levers, the Chelby levers are mechanically superior. The design allows the lever to engage the string from the side and limit the possibility of strings lifting off the bridge pin. Professional harpists appreciate the red and blue colored caps, which make it easy to locate the C- and F-string levers. The lever is attached to its base by a hex bolt. A synthetic washer is spaced between the lever and base, creating a smooth and controlled, lifting action that resists slipping once engaged. The base of each lever is mounted to the harp arm by two screws, should any adjustment be necessary. The bridge pins for the Chelby levers have also been improved; they can be adjusted, in or out, by simple turning with a hex wrench.

19 DuPont hard nylon strings, a range from F below Middle C to High C, 19 sharpening levers, engraved and inlaid walnut frame and a high quality Finnish birch ply soundboard for exceptional sound and strength.
Approximately 31" high. Non-standing design for children.

SPECIAL NOTE ON STRINGS:

There is no warranty on strings. Manufacturers recommend that you change the strings every 3-4 months. It is always a good idea to keep an extra set of stings to replace any that may break. You should always wipe down your strings with a clean dry cloth after use. If you store your instrument, you should consider changing the strings when you pick it up again.

Item Weight: 7.1 lbs.
Item Length: 28.25 Inches
Item Height: 16 Inches
Item Width: 7.5 Inches
Origin: PK
UPC: 844731062766

Packed Weight: 11.5 lbs.
Ship Weight: 35 lbs.
Ship Length: 32 Inches
Ship Height: 21 Inches
Ship Width: 9 Inches